Tree Climbing Safety Checklist-TSL Tree Views!

Climbing a tree is a mind boggling errand that ought to be treated with proper strategies. The instruments and procedures accessible for the cutting edge climbing are immense and developing. The capacity to pick the correct apparatus or method for any given condition and afterward applying it securely and proficiently is more imperative than any other time.

Furthermore, be mindful to sounds that could show a potential danger, for example, the humming of hornets and honey bees, or some other creature clamors. The following aspects should be kept in mind before climbing for security measures.

1. Inspection Of Gears:

The security of a climber relies on the appropriate hardware that should be in great working condition. There are Personal Protective Equipments used by climbers which protect them from injuries or any other damages.

The most commonly used protection equipments are Defensive Clothing, Head Protection, Eye Protection, Hearing Protection, Leg Protection/Chaps, Boot, Tree Climbing Spikes and Gloves. Make sure that all hardware is inspected as indicated by maker’s guidelines.

2. Inspection Of Ropes:

Ropes are important climbing equipments that prevents climber from falling.  Always use good quality syntactic ropes that are manufactured for tree climbing.

The minimum diameter of a rope should be ½ and it has the capacity of 54000 lbs without breaking. Inspect the rope for defects. If it has cuts abrasion, pulls or if it is brittle, bumpy or glazed then don’t use it for climbing.

3. Inspection Of Harness:

Regardless, of what type of climber you are, you had better be comfortable in your harness. Your harness clasps ought to be turned around in 3 places: Left Leg, Right Leg, and Waist. When you put on your harness, you ought to complete properly before you do other things.

On the off chance that you don’t turn around your bridle, in case you fall your harness may pull open, sending you to the ground and into a cast. Harness can be cracked or damaged by excessive wear.

4. Inspection Of Carabineer:

The rope ought to go through the belay gadget and the carabiner joined to the belayer at their protected belay circle. This appears to be basic; however, it is not hard to bolt off a carabiner appended just to the belay gadget.

In a fall, the rope will fly out of the gadget burn your belayer’s hands and you will deck out. Likewise, ensure the belayer’s locking carabiner is bolted off. If it’s not bolted off, it will open effortlessly which can be dangerous.

5. Inspection Of Weather:

The climbers must survey the natural perils and screen the climate for the duration of the day for changes that could make climbing more perilous.

Never climb a tree if it is not completely sunlight, a lightning tempest is close, a rainstorm is coming, or if the air temperature is sufficiently low to make a hazardous condition in your judgment.

Author Bio:

Shawn Michaels is a blogger who loves to write about his outdoor experiences. He is also a passionate rock climber and loves travelling. He is currently studying and spends his free time reading reviews and gear shopping! He regularly blogs at

Scroll to top